22=A Preset stores CoDecS/FilterS and their properties and quality settings
23=Loads the selected Preset to ALL current settings
24=Deletes the selected Preset
25=Saves ALL current settings to a Preset
26=Loads the system configuration to ALL current settings (Like when the program starts)|(but it don't include FilterInfo Modifications, these are to remain unchanged)
27=Saves ALL current settings to SYSTEM. After applying it reloads everything from the SYSTEM.|It takes time, but if a Filter/CoDec registration failed|(or invisible/undetectable for some reason), it will be visible in the current settings after applying.
28=Same as Apply, RE-registers all already registered FilterS/CoDecS,|this causes them to reset to initial state
29=The changes did not applied on the system! Would you like to apply them before quit?
30=If a Filter/Codec has this color, the file for it does not exist!
31=made by
32=Version:
33=Thanks for all the technical help to:
34=About Help: Help is in the ToolTips/Hints. Just keep the mousecursor on an object (button, text, etc.)
35=&OK
36=&Cancel
37=FilterS/CoDecS now registered in the system
38=FileName
39=Click here double to copy to clipboard
40=Current modifications planned
41=This modification list will be applied with Apply or Repair Button.|This is also part of a preset. (If you save to preset)
42=&Configure Filter
43=&Configure CoDec
44=About CoDec
45=Capture Format
46=Capture Source
47=Capture Display
48=Get FilterReset to plans
49=A FilterReset modification resets the Filter's FilterData to Filter's defaults,|the Merit and Pin Informations. (If it is a DirectShow Filter,|it is made by Re-Registering Filter's file. If the file contains|more than one Filter, the other FilterS inside the file will also be reseted)
50=Get Merit changes to plans
51=This modification changes only the Merit of the Filter
52=Get Infos changes to plans
53=This modification changes only the Pin Informations of the Filter|(altough you can combine with Meritchange if you want)
54=Delete this modification
55=Deletes the selected modification from the plans/list, therefor it won't be applied.
56=Filter/CoDec Informations
57=These are the Filter's/CoDec's Informations,|Merit and Pin Informations, you can change.
58=Merit is the priority of the Filter.|(Programs always use the Filter with higher values|if more than one could be used at a point)
59=FilterData is broken!
60=FilterData's Version is not 2!
61=FilterData synchronization error!
62=FilterData error, MediaType address is invalid!
63=Writeback is not recommended.|This Filter might have a custom FilterData format.|If you change this with WriteBack, who knows what the results will be!|Although if the filter doesn't have a custom FilterData format,|then it might have previously put the wrong FilterData into the Registry.|(example: 3ivx D4 Video Decoder, Elecard PIM2 Null)
64=Read-Only Mode! You can't modify FilterData.
65=FilterData in this case is generated On-The-Fly.|It would be very complicated to write data back to the registry.
66=Add MediaType
67=Add SubType
68=Edit Pin
69=Select MediaType
70=Select SubType
71=Can be zero pieces of this pin
72=This pin is renderer
73=Can be many pieces of this pin
74=Are you sure you want to delete this (Sub)MediaType?
75=Loading settings from the system...
76=Current Registry-File imports
77=These Registry-Files will be imported to the Registry
78=Add
79=Registry File (*.reg)
80=All File (*.*)
81=Select Registry File(s)
82=Ideas and support by
83=Show Non-Existent CoDecS/FilterS on the first page
84=Please wait...
85=You use the program at your own risk - the author accepts no responsibility for|any problems or damages which might arise from its use!|There is technical support for the software, but it is not guaranteed.|This program may be used commercially free of charge and it is free to copy,|but sell it or remove any copyright information from it is prohibited!|If you use this program, you agreed to these terms!
86=Be careful with FilterData modifications! (Second Page)
87=You can run the program with one of these switches:| /SelectPreset:PRESETNAME - Selects a preset after program is loaded| /ApplyPreset:PRESETNAME - Selects, Loads, and Applys a preset without graphics| /UnRegAll - UnRegisters all CoDecS & FilterS without graphics| /ReRegisterBaseCoDecS - ReRegisters the base-windows CoDecS & FilterS without graphics